How to sew a power shoulder long sleeve leotard sewing pattern for drag queens Drag Queens Costume, Fashion, Wedding, Prom, Fantasy, Fairy, Latex, Goth, Stripper

How to Sew a Power Shoulder Leotard

A sewing tutorial for our drag queen fashion sewing pattern.

Jump to Instructions

Sew an electrifying drag queen ensemble with our Long Sleeve Leotard Sewing Pattern, featuring large power spike shoulders and an optional bust peekaboo cutout! Designed for the bold and daring performers, this pattern is a fantastic addition to your wardrobe, allowing you to flaunt an unforgettable silhouette on stage. This accessory top is perfect for drag artists looking to make a statement. Crafted with stretch fabrics, this leotard promises both dramatic flair and comfort.

Sizing Details

This pattern is available in our unqiue drag queen sizes (XS-4X). Please review our sizing guide for more information on our size measurements.

Sizing Guide

Fabric Suggestions

Suitable for stretch fabrics:

  • Miliskin
  • Spandex
  • Stretch Sequin
  • Lycra
  • Stretch Knits
  • Stretch Vinyl

Notions

  • 20" - 22" inch invisible zipper
  • Lingerie foam or ultra firm interfacing for shoulders
  • Optional: Tear-away stabilizer for zipper
  • Optional: Double folded bias tape for peekaboo

Fabric Yardage

This pattern requires the use of non-stretch fabric. Please find the yardage needed for each size below.

Sizes Fabric width 58” Interfacing width 20”
XS 1.50 yards 2 yards
S 1.50 yards 2 yards
M 1.50 yards 2 yards
L 1.75 yards 2 yards
XL 1.75 yards 2 yards
2X 1.75 yards 2 yards
3X 2 yards 2 yards
4X 2 yards 2 yards

For information on converting inches to meters, please check out our conversion guide.

Yardage Conversion Guide

Sewing Instructions

 

Guide Color Key
How to sew a power shoulder sleeve leotard sewing pattern for drag queens

Fabric Pieces

After cutting your fabric, you should have following peices: one seamless front, one seamless back, 2 sleeves, and 2 collar peices.

How to sew a power shoulder sleeve leotard sewing pattern for drag queens

Stitches

For this project, the recommended stitches are a serger overlock stitch, a stretch stitch, or a zigzag stitch. A straight stitch may cause the threads to snap and is not advisable.

Step 1 How to sew a power shoulder sleeve leotard sewing pattern for drag queens

STEP 1

Hem the optional peekaboo bust cutout and hem around the hole, or use a double folded bias tape.

Step 2 How to sew a power shoulder sleeve leotard sewing pattern for drag queens

STEP 2

Take the front piece and the two back pieces, with right sides facing each other, and pin them together at the shoulder seams. Sew along these seams.

Step 3 How to sew a power shoulder sleeve leotard sewing pattern for drag queens

STEP 3

For the collar, place the two pieces right sides together and sew along the top, shorter curve.

Step 4 How to sew a power shoulder sleeve leotard sewing pattern for drag queens

STEP 4

Then, turn the collar right side out and place a pin in the center.

Step 5 How to sew a power shoulder sleeve leotard sewing pattern for drag queens

STEP 5

Lay the front and back pieces right side up and pin the collar around the neckline with the center pin matching the center front, keeping the collar upside down. Serge or sew in place.

Step 6 How to sew a power shoulder sleeve leotard sewing pattern for drag queens

STEP 6

Insert a 16-20 inch invisible zipper along the center back opening starting at the collar. The right side of the zipper should face the right side of the fabric. Use a straight stitch with a zipper foot for sewing. For a flat zipper finish, you may use a tear-away stabilizer between the zipper and the fabric.

Step 7 How to sew a power shoulder sleeve leotard sewing pattern for drag queens

STEP 7

After attaching the zipper, fold the excess fabric at the top of the zipper vertically and hand-stitch it down to secure this fold before proceeding.

Step 8 How to sew a power shoulder sleeve leotard sewing pattern for drag queens

STEP 8

Next, fold the zipper tape horizontally and pin in place, ready for topstitching. Repeat the same steps on the opposite side.

Step 9 How to sew a power shoulder sleeve leotard sewing pattern for drag queens

STEP 9

Topstitch around the zipper sides to reinforce and neatly finish the edges.

Step 10 How to sew a power shoulder sleeve leotard sewing pattern for drag queens

STEP 10

Attach the back bottoms to the lower part of the back piece with the zipper, sew them right sides facing each other.

Step 11 How to sew a power shoulder sleeve leotard sewing pattern for drag queens

STEP 11

Your 3 back pieces should now be sewn together.

Step 12 How to sew a power shoulder sleeve leotard sewing pattern for drag queens

STEP 12

Gather 2 sleeve pieces. Depending on your fabric you may need to install interfacing or foam to the shoulders to keep the shape. Use the line guide on the paper pattern to cut your interfacing from the elbow to the armpit. Depending on your type of interfacing you can either pin in place or press on with an iron, to the wrong side of the fabric.

Step 13 How to sew a power shoulder sleeve leotard sewing pattern for drag queens

STEP 13

To create one sleeve, stack 2 pieces right sides facing each other, with the interfacing pinned or fused on, and sew or serge along the outer pointed edges of the sleeve down to the armhole. Repeat for other sleeve.

Step 14 How to sew a power shoulder sleeve leotard sewing pattern for drag queens

STEP 14

Spread out the front and back right side up and gather your sleeves.

Step 15 How to sew a power shoulder sleeve leotard sewing pattern for drag queens

STEP 15

Align and pin the sleeves around the armholes, right side of the sleeve facing the right side of the front and back, using notches as a guide. Each sleeve curve is symmetrical, so there's no designated front or back. Serge or sew the sleeves in place and repeat for the other side.

Step 16 How to sew a power shoulder sleeve leotard sewing pattern for drag queens

STEP 16

Turn the garment wrong side out and sew the inner sleeve seams closed, continuing down the sides of the garment and the crotch.

Step 17 How to sew a power shoulder sleeve leotard sewing pattern for drag queens

STEP 17

Hem with leg holes using a zig zag stitch or fold over twice for a rolled hem effect with a stretch stitch.

Step 18 How to sew a power shoulder sleeve leotard sewing pattern for drag queens

STEP 18

Finally, hem the ends of the sleeves with a rolled hem, stretch stitch, or zigzag stitch.

Paper Pattern Assembly

For information on how to assemble your downloaded pdf pattern, please check out our printing guide.

Pattern Assembly Guide

Back to blog

Related Sewing Patterns

Earn Free Patterns

Earn exclusive discounts on our sewing patterns, and receive some for free! Become a Katkow Sewcial Creator by creating high-quality content featuring our patterns.